|
|
Viewing Heated Motorcycle Grips: Keep Your Fingers a Bit LongerHeated Motorcycle Grips: Keep Your Fingers a Bit Longer
|
For all-season bikers, having heated grips is by no means a luxury, if you don't want your fingers freezing, that is. Installing heated grips is not that difficult and can be done with some simple steps. This article explains. By Frank Strider If you are, like me, an all-season motorcycle rider, then you probably are confronted with cold weather at some times throughout the year. Therefore, having heated grips is by no means a luxury, if you don't want your fingers freezing, that is. Installing heated grips is not that difficult and can be done with some simple steps. The Installation If you don't feel comfortable installing anything on your motorcycle on your own, you should pay someone else to do it for you. Alternatively, ask a friend to do it for you while you watch and help; that way you learn that it can be fun to work on your bike. If you are comfortable doing it yourself, you will first need to choose which heated motorcycle grips you would like to install. Hop on to the Internet, do a search for grip manufacturers, and see what kind of heated grips have your specifications. Then you need to determine if that type can be mounted on your motorcycle. Next step is to order them, and then you start the installation. Always start with cleaning, if needed, your working area before you start a project. Not that installing these grips is very complicated, but you don't want to be looking for your tools and parts all the time while those things disappear under the rubble of an old project. A thing you should be aware of is that the diameter of the handles will increase in width once you have installed the heated grips. 1. Put the grips on the handles 2. Wrap the grips as tight as possible 3. Wire the grips up Sometimes there will be extra wire that is delivered with the grips, thus you need to plan what to do with that when the grips are connected. One thing you can do is just loop the extra wire around and tie it with a cable tie. Another thing you could do is loop the extra wire in a circle and put it under the bar. That last one is probably the best way to go - it is easier to remove the grips if you need to, and if you did a good job securing the wire, it will be out of view. When you are sure that the grips, wires, and switch are where you want them to be, you should follow the instructions that came with the grips and start hooking them up to your battery. When all is done and works as it should, you can start to enjoy those all weather rides. Most of the heated grips that can be bought are without a thermostat, so keep enough room for that switch on your handlebar. You don't want to pull over every time you need to switch the heater for the grips on or off when you are on a long trip. When you see the look on your friends' faces when you pull over for the 4th time just to pull the switch of your heated grips, you will wish you had made sure that the switch was on your handlebars. About the Author: Bikes, bikes, bikes, that's Frank Strider, always talking about motorcycles. He loves to tell you the ins and outs of owning one or more motorcycles at http://www.motorbikeplace.com. Article Source: 1st Rate Articles - http://1stRateArticles.com |
|